Eufy camera red light issue can occur due to many reasons. The Eufy security cameras are a fantastic option for your home security. The Eufy cameras, like any other smart home device, come with a light. This light flashes and turns to various colors in order to notify users that there’s some technical or internal issue on the device.
If you see the Eufy red light issue on your device, it indicates that your camera is not working in a normal state. Moreover, you might see your camera not recording as it should. Thankfully, the Eufy red light issue can be easily fixed by following some tips and tricks that are mentioned in this post.
So, if your camera also has a red light issue, you can fix it on your own.
Resolve Eufy camera red light
This section of this post will help you get your Eufy home security camera back to functioning again in just a few steps. Please complete the following steps to get rid of the Eufy red light issue:
- Firstly, ensure that the Eufy camera is connected to the internet.
- To cross-check the network connection, open the Eufy app on your mobile.
- After that, disconnect your camera from the network and then re-connect it.
- In case the WiFi network is not working, you may need to reboot your wireless router.
- Disconnect the Ethernet cable and the power connector.
- Press and hold the SYNC button on your camera for 10 seconds.
- Once the screen on your device goes off, release the SYNC button of your camera.
- After that, you need to wait for a few minutes.
- Plug your camera back into the power outlet and then restart it.
These steps will eliminate the Eufy camera red light issue for sure. If you still see the same issue occurring on your device, please reset your camera and reconnect it to a WiFi network.
Does Eufy camera red light mean it’s not fully charged?
The Eufy red light does not mean that your camera has a low battery or it needs to be charged. The battery or charge status of your Eufy camera is indicated with the help of the blue light. If the camera is fully charged, you will see all the blue bars illuminated. In case the camera is not fully charged or needs to be charged, the blue light will flash and the blue bars will go off. To better understand the behavior of lights on your Eufy camera, you need to learn all the light patterns and behaviors.
Reset Eufy camera
If the above steps don’t help resolve the issue, you can always reset the camera settings to the factory default. Here are some steps you can follow:
- Find the Sync button on your Eufy camera. It is usually located on the rear. However, in some models, it may also be located on the top surface.
- Press and hold the Sync button for about ten seconds. After this, you will hear two beep sounds.
- This is an indication that you can now release the Sync button. The camera will now reset to its factory settings.
Keep in mind that after reset, the camera settings will be automatically deleted. Your camera will go back to the default state and you will need to reconfigure the settings.
Final thoughts
The Eufy camera red light issue is one of the most common issues in households. The Eufy red light can show up on your device if it is unable to establish a connection with your home WiFi network. You can also try tweaking a few settings of your WiFi router as a part of the troubleshooting steps.
We hope this post helped you eliminate the red light on the camera without requiring any professional help. If you want further assistance, please reach out to our support experts.