The Eufy Robovac 11S was designated the best robovac because of the various new features it offers to users. It is the slimmest Robovac with a 2.85 altitude, with noiseless functioning. This model offers multiple new features to ensure tidy surroundings. Additionally, the Eufy robovac 11s reviews are great. You just need to accurately set it up to make the most out of your Eufy Robovac 11S.
If you want to know about the Eufy Robovac setup, keep reading ahead! Because in this blog, we’ll discuss the whole procedure along with the troubleshooting methods. So if you are facing any issues, you can use these methods to fix the issue with Robovac.
Steps for the Eufy Robovac Setup
Although you can find the setup instructions in the Eufy Robovac 11S manual, we’ll clarify the steps for you. You need to ensure that you follow these steps carefully to get the best out of your Robovac setup. To simplify the process, we have divided the procedure into sections. The setup instructions are as follows:
Preparing the Robovac
- Before you start using the Robovac, you need to install the side brushes.
- After that, turn on the Robovac’s power switch. You can find it at the bottom of Robovac.
- Now, you need to install the charging base. It is recommended to install it on a hard surface and next to a wall.
- Ensure there are no obstructions within the 1 m of the left side and the 2 m of the right side of the front of the base.
- Now, you need to install the base properly. You just need to plug the adapter into the charging base and an electrical outlet.
- When the base is correctly installed, the LED light on the base should turn white.
Charge the Robovac
- The Eufy Robovac 11S works on a rechargeable battery that you need to charge before using the vacuum.
- Whenever the battery of the Robovac is low or when it’s done cleaning, it returns to the charging base.
- There are two methods to charge the Robovac. One is by attaching the Robovac to the charging base by lining the charging pins with the charging pins on the base.
- The other way is through the remote control. You can just press the ‘Home’ button and the robovac will return to the charging base.
Initiate Cleaning
- When you start cleaning the house with the Robovac, ensure the switch on the bottom is on.
- You can turn on the cleaning by pressing the button on the Robova or the remote control. This will enable cleaning in ‘Auto Mode’.
- You can turn off the cleaning by pressing the same button.
This is the Eufy Robovac 11S setup procedure. What’s more, is that there are several cleaning modes available in the Eufy robovac. You can choose the most suitable one fit for you.
Some Eufy Robovac 11S Troubleshooting Methods
When the Eufy Robovac 11S starts having issues, it can be troubling. But you don’t need to worry, as these issues can be fixed easily. Sometimes there’s an issue from our end only. Before fixing the issue, you need to figure out what the issue is. Below are some issues, along with the Eufy Robovac 11S troubleshooting methods:
Robovac isn’t Activating
- Check whether the main switch is on or not. If it’s off, it won’t work at all.
- Ensure the battery of the Robovac is full, with a low battery, it will not work properly.
- You need to make sure the Robovac is inside the remote’s range.
Remote Control isn’t Working
- If the remote isn’t working, you need to check its batteries. You may need to replace them.
- Ensure the Robovac is powered on and fully charged.
Vac Stops Working Abruptly
- Verify if the robovac is stuck on an obstruction
- Charge it, the battery could be low.
- You can try turning off the main power switch, wait for a few seconds and then turn it back on.
The Side Brushes aren’t Working
- You need to clean the side brushes regularly.
- Verify if the side brushes and the brush guard are accurately placed.
- Clear the dust collector of the robovac.
Robovac is Unable to Charge
- If the indicator light of the base does not light up, you may need to replace the base.
- Clean the dusting pins of the Robovac using a dry cloth.
These are the Eufy Robovac troubleshooting methods, you can use to fix the issues. If there are any other issues you are facing with the Eufy Robovac, reach out to our team right now for an effective solution.