The Eufy video doorbells are the sleek, subscription-free, wireless solution to keep an eye on what’s happening at your door. These doorbells are designed with an excellent 5 MP camera offering a wide 160-degree angle to cover everything in detail. Moreover, by accomplishing the Eufy Video Doorbell Setup, you can leverage the benefit of two-way audio to communicate easily at the door. Therefore, if you are looking to set up this excellent device to add an extra layer of security to your home, then follow this guide to set it up in under 10 minutes!
Pre-Installation Checklist For the Eufy Video Doorbell Setup
Before you initiate the Eufy Doorbell Setup, you must count on certain things. So, here are the key considerations for the doorbell setup:
- Required Tools- Screwdriver, smartphone, and wifi details.
- Compatibility- Voltage(16- 24VAC, 30VA), existing doorbell wiring, wifi strength
- Device Placement- height, angle, away from EMW devices, or glare.
After that, you can proceed further with the step-by-step procedure of the Eufy smart doorbell setup. Therefore, you must know the preliminary steps to complete this process without any hassle.
How to Setup Eufy Doorbell (Battery Powered)?
Nonetheless, installing and setting up the Eufy video doorbell is a simple and DIY-friendly process that doesn’t need any wiring. Moreover, you can mount, connect, and configure your doorbell within a few minutes and enjoy its optimal performance.
But, before heading towards the Eufy Video Doorbell Setup, it is essential to know about your device. There are different types of Eufy video doorbells, including the battery-powered, wireless, and wired ones. So, the procedure for each device is different. In this section, we highlight How to Setup Eufy Doorbell with batteries. Have a look:
Steps for the Eufy Doorbell Setup
- Firstly, unbox your Eufy doorbell and get all the components.
- Then, charge your Doorbell sufficiently before using it.
- Now, make sure your smartphone is connected to the home wifi.
- Further, install the EufySecurity app on a compatible smartphone.
- Then, launch the app and access your account.
- Now, go to the home screen of the app and visit Menu>My Devices.
- Tap ‘Add Device’ and select your device to register it.
- Otherwise, scan the QR code given on the back of the doorbell with your phone.
- After that, press the SYNC button on the doorbell for 2 seconds til you hear a beep.
- Wait till the HomeBase detects your video doorbell.
- Then, you will visit the Doorbell Setup page.
- Watch the given setup video and follow the instructions to complete the process.
- Now, remove the old doorbell, drill the holes, and attach the mounting plate.
- Tighten the screws with the screwdriver and connect your doorbell straight to this plate.
- Turn on your doorbell and test that it is working correctly.
- Finally, the Eufy Video Doorbell Setup is finished.
Pro Tip: In the battery-powered Eufy video doorbells, it is optional to use the HomeBase. Similarly, you can opt for the wired doorbell setup, but the steps may vary.
Wrapping Up
In conclusion, performing the Eufy Video Doorbell Setup is key to exploring the security features of this smart gadget. This post explains this complex process through easy instructions. Hence, by following our step-by-step guide, you can upgrade your home security within minutes.