The Eufy Robovac Vacuum is a popular cleaning machine that helps workaholics manage their home cleanliness. This smart vacuum cleaner uses sensors and advanced programming to roam around your house and makes the cleaning task easier. With so many advantages, users face an issue of EUFY robovac not charging occasionally, which is very common.
Moreover, this issue mainly arises due to the malfunctioning of the charging dock, which may prevent the vacuum from obtaining power. Another case is a defective power cord slows the charging procedure or leads to not charging. However, many other reasons are also liable for this problem that we will analyze later.
In addition, if you are seeking assistance with the EUFY robovac not charging issue, then you must read this guide. Here, you will understand the reasons and the strategies to fix the charging issues.
Why is my EUFY robovac not charging?
As we discussed some of the issues, in this section we are going to know about the causes of EUFY robovac not charging. So let’s go ahead and analyze the issues:
- Insufficient power supply
- Using burnt or damaged power sockets
- Dirty charging contacts
- Improper charging base placement
- Damaged power cord
- Using duplicate adaptor
- The battery is not properly inserted inside the vacuum
- Dead Battery
EUFY Robovac Troubleshooting Steps
In this section, we are going to learn about the strategies to resolve the Eufy RoboVac not holding charge issue. So let’s have a look at some troubleshooting steps to resolve the issue:
Ensure Sufficient Power Supply
There should be an adequate power supply. Check that the electrical sources are not burnt or faulty to prevent issues like the device not getting charged and more.
Clean the charging contacts
If the charging contacts are dirty then it halts the vacuum charging as it is not connected to the dock station. So ensure to clean the charging contacts regularly.
Relocate the Base Station
Place the base station at the central location and keep it within range of the router’s network to a nearby power supply.
Replace the power cord & adaptors
If the power adapter and cord of the dock station are damaged for any cause, then change them instantly, so that the charging issue gets fixed.
Reinsert the battery
Occasionally, if the battery is not correctly inserted into the vacuum or it gets dropped from its position, then vacuum charging issues arise. To fix it, open the vacuum case and extract the battery. Again, reinsert it appropriately and check if the issue gets resolved.
Use original adaptors
If you are using the duplicate adaptor for your EUFY Robovac, then it may damage your device as well as create power issues. Thus, always choose to have an original adaptor.
Dead Battery
If the battery loses its ability to hold the charging, it could be due to the dead battery. So, check the battery condition and change it if required.
Why is my Eufy RoboVac not holding charge?
If your smart vacuum is not able to hold the charging then this issue occurs when the user is not operating the original AC adaptor, the charging pin is dirty, or the vacuum is clogged with liquids, etc.
Therefore, to resolve the issue, primarily, use the original AC adaptor for your vacuum, clean the charging pin, and fix the issue with the charging parts or replace them if damaged. These will help you to resolve the non-charging issues.
Bottom Line
Last but not least, the above-given information regarding the EUFY robovac not charging helps you understand the reasons behind this issue. Also, you find suitable and effective troubleshooting methods to resolve the above-discussed vacuum problem. If you are still seeking more help for the same, get in touch with our professionals!
FAQs
How do I check my EUFY robovac battery percentage?
To check the EUFY battery percentage open the Eufy Security app and then choose the battery option. Now, tap on the Vacuum Settings and you will see the battery icon under the name of the Battery Vacuum.
How do I reset my robot vacuum?
To reset the robot vacuum, press & hold the Start/Pause and Recharge buttons together on the vacuum top panel for at least 5 seconds. Now, release the buttons when you hear the reset Wi-Fi voice alert. The sound signifies that the reset process is complete.
How to know if eufy robovac is charging?
When the LED indicator on the top panel of the vacuum displays a pulsing blue light, then it signifies that the eufy robovac is in charging mode.