Generally, the Eufy C220 keypad is a convenient security gadget that can control your whole security system within seconds. Additionally, it can work with the Home base with 180 days of battery life after charging. Besides so many advancements, users sometimes encounter Eufy C220 keypad not working issues.
However, several reasons can cause the keypad to malfunction, with the primary one being a low battery. It is also important to understand and address the issues with the smart keypad for uninterrupted Eufy security smart lock C220 performance. Additionally, you can refer to this informative post to learn more about the keypad not working.
How to troubleshoot the Eufy C220 keypad not working?
Moreover, to resume the optimal functioning of the Eufy security smart lock C220 & keypad, a home base is the primary necessity. In short, check that the keypad and home base are synchronized and linked to the same network. If it still does not work, then must check the below-mentioned section to find the responsible causes and resolutions to fix not working problems:
Causes behind the Eufy C220 controller not working
Before, you choose the methods to fix the keypad not working issue, must look at the responsible reasons first:
- Low/completely drained battery
- The keypad disconnects from the Home base
- Red LED flashes on the smart keypad
- The home base disconnects from the home network
- Signal barriers
- Hardware issues
Troubleshooting Tips to resolve C220 smart controller not working issue
Furthermore, you are now aware of the primary causes behind the smart programmable device not working problem. Let’s take a look at the effective fix-outs to eradicate such an issue:
- First and foremost, check that the smart keypad is charged completely.
- Look that the batteries are placed to the right points in the compartment. If the battery still does not charge, then it is time to replace this.
- If the smart controller shows disconnectivity from the home base. Hence, to reconnect them, press and hold the Sync button on the keypad until it blinks blue.
- Eliminate the signal obstructions around the base station/router and keypad, such as cordless phones, furniture, mirrors, etc.
- If you recently changed the networking device or upgraded its wifi user details, then resync your home base to the router to avoid the Eufy C220 keypad not working issue.
- Power cycle the smart programmable device and the home base to eradicate technical glitches and bugs.
- If you see a red light on the programmable device, then it depicts that the keypad is updating, remains on low power, or is offline. Hence, find the red light reason and fix it accordingly.
- Also, check the hardware damage on your keypad. If found, replace it immediately.
- Similarly, if you face issues with the wireless network, then use an ethernet cable to stabilize it.
- If the issue still persists, then hard reset the keypad.
Bottom line
In a nutshell, this brief post summarizes the detailed information regarding the Eufy C220 keypad not working problem. In addition, you explore the root causes and easy troubleshooting tips to eradicate this issue. Furthermore, you find all the necessary information here in this brief post!