The Eufy video doorbell is one of the best video doorbells on the market and offers round-the-clock security on your premises. With this video doorbell, you can ensure comprehensive monitoring of your home or office. The device allows you to pre-record messages or conversate with people in real time as they show up on your doorstep.
In case you have recently bought a new doorbell, you must be wondering how to setup Eufy doorbell. To learn how to install Eufy doorbell, you need to install the device in place of the old doorbell and use the EufySecurity account to set up the device.
This post will explain to you how to setup Eufy doorbell by following the step-by-step instructions. Make sure you follow the steps carefully in order to ensure that your doorbell is installed correctly.
How to install Eufy video doorbell?
Prior to starting with the Eufy video doorbell setup and installation, make sure you cut off the power supply to the area where you are going to work. Once you are done, follow the steps below to learn how to setup Eufy doorbell:
- Ring your video doorbell to ensure that the chimes are working perfectly well.
- After that, kindly disconnect the power to the doorbell. Now, test lights in the area in order to cross-check that the power is disconnected.
- Take off your doorbell’s cover. Look for the screws with Trans and Front on them.
- Thereafter, use the wire that was supplied with the Eufy video doorbell to connect the two terminals.
- If you were using a doorbell previously, please remove it from the place.
- After that, mark the holes on your doorbell for the screws with the help of the screw hole card. The screw hole card is supplied with the Eufy doorbell.
- Finally, when you are done with the installation, restore the power supply and the doorbell should light yellow.
Setting up the Eufy video doorbell
- Download the EufySecurity app on your device.
- Create your Eufy account. If you already have one, you need to directly sign into the account.
- After that, tap “Add Device” and then choose the Eufy video doorbell in the app.
- Tap OK and then allow the Eufy app to access the phone’s camera.
- Scan the QR code on your doorbell through the app and follow the in-app instructions to learn how to setup Eufy doorbell.
- Finally, the app will test the voltage in order to ensure the correct voltage is being supplied to the device.
Connecting Eufy doorbell to Wi-Fi
Once you have finished setting up the video doorbell, it’s time for you to connect it to a WiFi network. Kindly follow the steps as follows:
- Go to the WiFi settings in the Eufy app and select the home network you wish to connect your device to.
- After that, tap Connect and follow the in-app instructions.
- Finally, press and hold the SYNC button on the device for 2 seconds.
- Tap CONNECT in the Eufy app and finally tap DONE.
Final thoughts
The Eufy video doorbell setup and installation is just a matter of 10 or 15 minutes. You first have to physically install the video doorbell near the doorstep and then download the app to configure the settings. After that, connect the video doorbell to a WiFi network, and you are done. If you face any Eufy video doorbell issues, please talk to our Eufy-dedicated support team.